Fire Damper Testing
in Rotherham
Rotherham's industrial heritage means a high concentration of manufacturing sites, distribution units and plant rooms — exactly the kind of buildings where ductwork runs long and fire dampers are easy to forget. With insurers and fire risk assessors asking harder questions every year, BS 9999 damper testing is moving up the agenda for Rotherham businesses.
We provide fire damper inspection, drop testing and remediation across Rotherham and the Dearne Valley, with clear documentation for your compliance file.
If a damper we certify is later found non-compliant due to an error on our part, we re-test and remediate it free. Every damper is drop-tested, cleaned and photographed by our own BESA-qualified engineers — never subcontracted — and reported to DW/145 and NAAD-22, so your insurer, auditor or enforcement officer accepts it first time.
Why Rotherham Buildings Test Their Fire Dampers
A fire damper is a passive fire protection device sitting in the ductwork wherever it passes through a fire-rated wall, floor or ceiling. It snaps shut when fire or heat is detected, keeping fire and smoke out of the ductwork. But dampers corrode, seize, jam with build-up and get painted shut — so BS 9999 and your fire risk assessment both require them to be tested at a documented frequency.
Untested dampers put buildings at risk:
- A seized damper lets fire and smoke travel freely through ductwork, bypassing the compartmentation your building was designed around
- Building owners and responsible persons face enforcement under the Fire Safety Order 2005 if dampers aren't tested at the required frequency
- Fire insurance claims can be reduced or rejected where damper testing records don't exist
- Fire risk assessments flag untested dampers as a critical outstanding action — and inspectors follow up
- Buildings housing vulnerable people — care homes, schools, student accommodation — face the strictest scrutiny
Buildings We Test Across Rotherham
Every building is different, but the common thread across Rotherham is ductwork crossing fire compartments — and dampers that need a proper schedule, proper testing and proper records.
Industrial & Manufacturing
Process areas, extraction systems and interlinked production units all need their fire dampers identified, scheduled and tested. We deal with difficult access and plant-heavy environments day in, day out.
Care Homes
Residential homes across Rotherham and Maltby depend on corridor and kitchen extract systems staying fire-safe. Damper testing is quick to arrange and one of the most valuable checks a responsible person can commission.
Schools & Community Buildings
From primary schools to leisure centres, public buildings face regular fire safety scrutiny. We test around your schedule and hand over a report your fire risk assessor will accept without follow-up questions.
Fire Damper Testing in Rotherham — FAQ
Do you cover the wider Rotherham borough?
Yes — Wath, Maltby, Dinnington, Swinton, Mexborough, Rawmarsh, Aston and Kimberworth are all within easy reach, and we work across the whole of South Yorkshire. We can attend most sites within a few working days.
How often do fire dampers need testing?
BS 9999 recommends testing every 12 months as standard, rising to every 6 months in higher-risk or critical environments like care homes and hospitals. Your fire risk assessment determines the frequency that applies to your building — we'll confirm it before we start.
Our ductwork is old and there are no damper records — where do we start?
That's very common. We start with a damper location survey to find and log every damper on site, including ones missing from existing records. You get a full schedule, then a testing programme built from it.
What documentation do we get?
A full test report listing every damper tested, its location, test result (pass/fail), any remedial action taken, and photographic evidence. It is issued upon completion of works and receipt of payment for your maintenance records, including any outstanding defects or access limitations.
The YPAC Compliance Guarantee — Pass or We Fix It Free
Most fire damper certificates we see would not survive an audit: no drop test carried out, no photographs, dampers that do not match the asset register. We built our reporting to change that — every damper we test is documented to BS 9999 with DW/145 and NAAD-22 standard reporting, so the record stands up on its own.
- Every damper drop-tested, cleaned and reset — the functional test is the whole point, and we do it properly on every single one.
- Photographic evidence for every damper — as found, tested position, and as left, so nothing is taken on trust.
- Reports an auditor or insurer accepts — DW/145 and NAAD-22 standard reporting with a full asset register, unique damper references and next test dates.
- Our guarantee: if a damper we certify is later found non-compliant due to an error on our part, we re-test and remediate it free.
- Never subcontracted — all testing is carried out by our own BESA-qualified engineers (AHO3 & AHT3).
Because we keep the work in-house, we take on a limited number of new compliance clients each month. Compliance certification issued on completion of works.
Book Fire Damper Testing in Rotherham
BS 9999 inspection, drop testing and remediation with full photographic reports. Coverage across Wath-upon-Dearne, Maltby, Dinnington, Swinton, Mexborough, Rawmarsh, Aston and Kimberworth.
Request a Free Quote →Or call 07356 176929
Free 5-Minute Certificate Check
Not sure whether your last fire damper test certificate would pass an inspection? WhatsApp me a photo of it on 07356 176929 and I'll tell you the same day whether it's compliant, what's missing, and what it means for your site. Free, no catch, no follow-up spam.
WhatsApp 07356 176929 → See What We Check For →